71
)
Note:
You can set the alarm input function at alarm input page (Please go “Setting → Advance →
Alarm input → Setting”). For more details, you can check Section 8.6
.
¾ Effective period: Set the period when the periodical sending is effective.
z Always: The periodical sending is always effective.
z Schedule: You can specify the period when the periodical sending is effective in the
schedule setting in the other section.
)
Note:
You can set schedule function on Schedule page (Please go to “Setting → Advance →
Schedule → Setting”). For more details, you can check Section 7.5
.
7.4 Alarm output
When you click Alarm output on the Advance mode menu, the Alarm output setting menu
appears. You can set in this menu to control the alarm out of I / O port on the rear of the device
linked to the alarm detection and the timer.
To Next Page
Loading...
