72
7.4.1 Setting
Alarm output: To activate the Alarm output function, select On. When you do not use the Alarm
output function, select Off.
¾ Digital output: Select High signal output and Low signal output as your alarm.
¾ Trigger condition: Select the mode of the Alarm output function. You can choose “Alarm” or
“Timer”.
¾ Alarm: Controls alarm output by synchronizing with an external sensor input or the built-in
activity detection function.
z Motion Detection: Click it on for using Motion Detection function as a sensor. You can
set motion detection function at the motion detection function page.
To Next Page
Loading...
