17
5.3 Client Setting
This function is only for the client.
Click this button to configure the settings of IP Camera, which includes Mode, View size,
Protocol, and Video buffer.
5.3.1 Mode
Click the drop-down list to choose MPEG4, MJPEG and JPEG video compression mode.
)
Note:
MJPEG streaming is unavailable if RTSP mode is On (Please check SETTING → BASIC →
Camera → General).
5.3.2 View Size
Select the desired display image resolution to 640*480 or 320*240. It is suggested that you go to
Client Setting to select a suitable View Size before using the IP camera as shown in the figure
below. For the PC whose resolution is less than 1280*1024, View Size of 320*240 is
recommended.
To Next Page
Loading...
