50
6.4.1 Account
The device default account and password setting is “admin / admin”. That means everyone who
knows IP address can access the device including all configuration. Therefore, it is necessary to
assign a password if the device is intended to be accessed by others.
¾ User name: Set a user name between 4-16 characters.
¾ Password: Set a password between 4-16 characters.
¾ Re-type Password: Re-type the password to confirm.
¾ Viewer Mode: Set the user mode among Admin, Operator, and Viewer. Different viewer mode
has different limits of authority.
z The Admin mode has all authority of configuration.
To Next Page
Loading...
