Switching Configuring LAG
User Guide
29
Note:
● It is recommended to configure the LAG function before configuring the other functions
for the member ports.
● Ensure that devices on both ends of the aggregation link use the same number of physical
ports with the same speed and duplex mode, flow control setting and QoS setting.
● Mirroring and mirrored ports cannot be added to an LAG group.
● The max number of LAG groups that the switch can support is as follows:
2 for TL-SG108PE; 8 for TL-SG116E, TL-SG1016DE, TL-SG1016PE, TL-SG1024DE and
TL-SG1218MPE.
● Each LAG group has 2 port members at least and 4 port members at most.
To Next Page
Loading...
