7
• Connecting to the Ground via the power supply
If the Switch is installed in the normal environment, the Switch can be grounded
via the PE（Protecting Earth）cable of the AC power supply as shown in the
following figure.
Figure 2-5
*
The figure is to illustrate the application and principle. The power plug you get from the
package and the socket in your situation will comply with the regulation in your country, so
they may differ from the figure above.
Note:
If you intend to connect the Switch to the ground via the PE (Protecting Earth)
cable of AC power cord, please make sure the PE (Protecting Earth) cable in
the electrical outlet is well grounded in advance.
To Next Page
Loading...
