2
¾ LEDs
Name Status Indication
On Power is on.
Flashing Power supply is abnormal.
PWR
Off Power is off or power supply is abnormal.
On The Switch is working abnormally.
Flashing The Switch is working normally.
SYS
Off The Switch is working abnormally.
On A device is linked to the corresponding port.
Flashing Data is being transmitted or received.
Green The linked device is running at 100Mbps.
10/100Mbps
Yellow The linked device is running at 10Mbps.
On A device is linked to the corresponding port.
Flashing Data is being transmitted or received.
Green The linked device is running at 1000Mbps.
1000Mbps
Yellow The linked device is running at 10/100Mbps.
1.3 Rear Panel
The rear panel of TL-SL5428E features a power socket and a Grounding
Terminal (marked with ).
Figure 1-2 Rea
r Panel
¾ Grounding Terminal: TL-SL5428E already comes with Lightning
Protection Mechanism. You can also ground the Switch through the PE
(Protecting Earth) cable of AC cord or with Ground Cable. For detail
information, please refer to section 2.3 Connect to Ground
.
¾ AC Power Socket: Connect the female connector of the power cord here,
and the male connector to the AC power outlet. Please make sure the
voltage of the power supply meets the requirement of the input voltage
(100-240V~ 50/60Hz 0.6A).
To Next Page
Loading...
