1
Chapter 1 Product Introduction
1.1 Product Overview
TP-LINK JetStream L2 Managed Switch provides both Web and Command
Line management interface. The Embedded Web Interface supports remote
configuration, monitoring and troubleshooting. The EIA-standardized
framework together with smart configuration capacity can provide flexible
solutions for different scale of networks.
The TL-SL5428E provides 24 10/100Mbps auto-negotiation RJ45 ports, 4
10/100/1000Mbps Auto-Negotiation RJ45 ports, 2 SFP (Small Form-Factor
Pluggable) module ports (27F, 28F) and 1 Console port. The Port 27F (28F)
and Port 27T (28T) are referred to as “combo” ports, which means they cannot
be used simultaneously, otherwise only SFP ports work.
Port Feature:
Combo Ports
10Mbps/100Mbps
RJ45 Port
10Mbps/100Mbps/1000Mbps
RJ45 Port
RJ45 Port SFP port
27T 27F
Port 1-24 Port 25-28
28T 28F
1.2 Front Panel
Figure 1-1 Front Panel
The following parts are located on the front panel of the Switch:
¾ 10/100Mbps Ports: Designed to connect to the device with a bandwidth of
10Mbps or 100Mbps. Each has a corresponding 10/100Mbps LED.
¾ 10/100/1000Mbps Ports: Designed to connect to the device with a
bandwidth of 10Mbps, 100Mbps or 1000Mbps. Each has a corresponding
1000Mbps LED.
¾ SFP Ports: Designed to install the SFP module. Port 27F shares the same
LED with Port 27T and Port 28F shares the same LED with Port 28T.
¾ Console Port: Designed to connect with the serial port of a computer or
terminal for monitoring and configuring the Switch.
To Next Page
Loading...
