10
Figure 3-4 Connecting to Power Supply
*
The figure is to illustrate the application and principle. The power plug you get from the
package and the socket in your situation will comply with the regulation in your country, so
they may differ from the figure above.
Powering on the Switch, it will automatically initialize and its LED indicators will
respond as follows:
1) All of the 10/100Mbps and 1000Mbps LED indicators will flash momentarily
and then turn off, which represents a resetting of the system.
2) The PWR LED indicator will light on all the time.
3) The SYS LED indicator will flash, which represents a successful
initialization.
Note:
If the LED indicators don’t respond as described above, please check the
power supply and its connection.
To Next Page
Loading...
