Manage the Extender
This chapter covers the following topics:
LED Control
Firmware Upgrade
Backup & Restore
Factory Defaults
System Log
Reboot
LED Control
LED Control can turn off the LEDs at the specific time. The extender can still work
normally after the LEDs are off.
1) Launch a web browser and type in http://tplinkrepeater.net, then go to
Settings-> System Tools -> Time Settings webpage. Select the Time
Zone of your location. Click Save to save your settings.
2) Go to Settings-> System Tools -> LED Control webpage, then set the
time to turn off the LEDs.
● Night Mode
If the Night Mode box is checked, all the LEDs are off in
the setting time.
Manage the Extender 22
To Next Page
Loading...
