Basic Requirements
Place your extender in a well-ventilated place far from direct sunlight,
any heater or heating vent.
Leave at least 2 inches (5cm) space around the device for heat
dissipation.
Turn off your extender and unplug the power adapter in a lighting storm
to avoid damage.
Use Web browser, such as Microsoft Internet Explorer 5.0 or above,
Netscape Navigator 6.0 or above.
Operating temperature of the extender should be 0℃~40℃ (32℉
~104℉).
Operating humidity of the extender should be 10%~90%RH (Non-
condensing).
Quick Setup
Using WPS (Wi-Fi Protected Setup)
1 Power On
Plug in next to your router.
2 Connect
1) Press the WPS button on your router.
Your router should support WPS. Otherwise, please use Using
your web browser.
Connect the Extender to the Internet 5
To Next Page
Loading...
