Figure 3-9 AP List
1) Find the SSID of the Access Point / Router or WISP which you want you to connect to, and
click Connect in the corresponding row. You will then see the page shown in Figure 3-10.
2) Select the security mode and enter the password that is the same as on your router or
access point in Wireless Bridge Setting.
3) You can name the bridge AP in Local Wireless Name, and configure the Local
Wireless Setting for the bridge AP.
4) Click Next in Figure 3-10, and you will come to Network Settings page for furthers
configuration.
Figure 3-10 Wireless Setting – Bridge with AP mode
13
To Next Page
Loading...
