choose “WEP” Security mode. And please note that WPA and
WPA2 have higher level of security than WEP.
2.6.6 Here we take “WPA2 Personal” as example.
Choose “WPA2 Personal” in the above interface, and then
you will send the interface below.
In the place of “WPA Algorithms”, please choose “AES”.
In the place of “WPA Shared Key”, please input your
password. Please note that this KEY is case sensitive; please
write it down on a paper and save it.
After these, please click “Save”, and then click “Apply
Settings”.
3. Advanced Configuration
3.1 For more advanced function of this wireless router, you
can find FAQs and Tutorials in the website below:
Please click:http://www.dd-wrt.com/wiki/index.php/Main_Page
And you can see the interface below; you can find FAQs and
To Next Page
Loading...
