97
Chapter 5
Configure the Router in WISP Mode (Hotspot Mode)
1. Visit http://tplinkwifi.net, and log in with the username and password you set for the
router.
2. Go to Access Control > Host and configure the host settings:
1 ) Click Add New.
2 ) Select MAC Address as the mode type. Create a unique description (e.g. host_1)
for the host in the Description field and enter 00-11-22-33-44-AA in the MAC
Address filed.
3 ) Click Save.
3. Go to Access Control > Target and configure the target settings:
1 ) Click Add New.
2 ) Select URL Address as the mode type. Create a unique description (e.g. target_1)
for the target in the Target Description field and enter the domain name, either
the full name or the keywords (for example TP-Link) in the Add URL Address field.
And then Click Add.
Note:
Any URL address with keywords in it (e.g. www.tp-link.com) will be blocked or allowed.
3 ) Click Save.
4. Go to Access Control > Schedule and configure the schedule settings:
1 ) Click Add New.
2 ) Create a unique description (e.g. schedule_1) for the schedule in the Schedule
Description field and set the day(s) and time period. And then click Add.
Downloaded from ManualsNet.com search engine
To Next Page
Loading...
