148
Chapter 7
Configure the Router in Range Extender Mode
3. Click Scan, select your host network from the AP List and click Conenct.
4. Enter your host network’s wireless password in the Password field.
5. Tick Lock to AP checkbox if you want to restrict the device’s connection to only the
network with this specific MAC address.
6. Click Save.
7. 4. 2. Extended Network
1. Visit http://tplinkwifi.net, and log in with the username and password you set for the
router.
2. Go to Wireless > Extended Network, you can view the SSID and password of the
router (Range Extender)’s wireless network.
3. If you want to share the same SSID of the host router, click Copy Host SSID and click
Save.
Downloaded from ManualsNet.com search engine
To Next Page
Loading...
