5.7 Wireless
Figure 5-10 Wireless menu
There are six submenus under the Wireless menu (shown in Figure 5-10): Wireless Settings,
Wireless Security, Wireless MAC Filtering, Wireless Advanced, Wireless Statistics and
Throughput Monitor. Click any of them, and you will be able to configure the corresponding
function.
5.7.1 Wireless Settings
Choose menu “Wireless
Wireless Settings”, and then you can configure the basic settings
for the wireless network on this page.
Figure 5-11 Wireless Settings - AP
Wireless Network Name - Enter a string of up to 32 characters. The same name of SSID
(Service Set Identification) must be assigned to all wireless devices in your network. The
default SSID is set to be TP-LINK_XXXX (XXXX indicates the last unique four numbers of
each Router’s MAC address). But it is recommended strongly that you change your
networks name (SSID) to a different value. This value is case-sensitive. For example, TEST
is NOT the same as test.
Region - Select your region from the pull-down list. This field specifies the region where the
wireless function of the Router can be used. It may be illegal to use the wireless function of
- 109 -
To Next Page
Loading...
