300Mbps Wireless N Nano Router
Received Packets - Packets received by the station.
Sent Packets - Packets sent by the station.
Configure - The button is used for loading the item to the Wireless MAC Filtering list.
You cannot change any of the values on this page. To update this page and to show the current
connected wireless stations, click on the Refresh button.
If the numbers of connected wireless stations go beyond one page, click the Next button to go to
the next page and click the Previous button to return the previous page.
Note:
This page will be refreshed automatically every 5 seconds.
6.7.6 Throughput Monitor
Choose menu “Wireless
Throughput Monitor”, and then you can see watch wireless
throughput information.
Figure 6-19 Wireless Statistics
Rate - The Throughput unit.
Run Time – The time this function is running.
Transmit – Wireless transmit rate information.
Receive – Wireless receive rate information.
Click the Start button to start wireless throughput monitor.
Click the Stop button to start wireless throughput monitor.
- 147 -
To Next Page
Loading...
