EasyManua.ls Logo

TP-Link TL-WR802N - Wireless Configuration (Settings, Security, Advanced)

TP-Link TL-WR802N
287 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
TL-WR802N
300Mbps Wireless N Nano Router
4.7 Wireless
Figure 4-18 Wireless menu
There are five submenus under the Wireless menu (shown in Figure 4-18): Wireless Settings,
Wireless Security, Wireless MAC Filtering, Wireless Advanced and Wireless Statistics. Click
any of them, and you will be able to configure the corresponding function.
4.7.1 Wireless Settings
Choose menu Wireless
Wireless Settings, and then you can configure the basic settings
for the wireless network on this page.
Figure 4-19 Wireless Settings - Router
Wireless Network Name - Enter a string of up to 32 characters. The same name of SSID
(Service Set Identification) must be assigned to all wireless devices in your network. The
default SSID is set to be TP-LINK_XXXX (XXXX indicates the last unique four numbers of
each Routers MAC address). But it is recommended strongly that you change your
networks name (SSID) to a different value. This value is case-sensitive. For example, TEST
is NOT the same as test.
- 48 -

Table of Contents

Other manuals for TP-Link TL-WR802N

Related product manuals