300Mbps Wireless N Nano Router
WISP Client Router - In this mode, the device enables multiple users to share Internet
connection from WISP.
4.6 Network
Figure 4-8 the Network menu
There are three submenus under the Network menu (shown in Figure 4-8): WAN, MAC Clone
and LAN. Click any of them, and you will be able to configure the corresponding function.
4.6.1 WAN
Choose menu “Network
WAN”, and then you can configure the IP parameters of the WAN on
the screen below.
1. If your ISP provides the DHCP service, please choose Dynamic IP type, and the Router will
automatically get IP parameters from your ISP. You can see the page as follow (Figure 4-9):
Figure 4-9 WAN – Dynamic IP
- 37 -
To Next Page
Loading...
