Region - Select your region from the pull-down list. This field specifies the region where
the wireless function of the Router can be used. It may be illegal to use the wireless
function of the Router in a region other than one of those specified in this field. If your
country or region is not listed, please contact your local government agency for
assistance.
Wireless Security - You can configure the security settings of your wireless network.
• Disable Security - The wireless security function can be enabled or disabled. If
disabled, the wireless stations will be able to connect the Router without encryption.
• WPA-PSK/WPA2-PSK - Input the password of your broadcast SSID.
• No Change - If you chose this option, wireless security configuration will not change.
3. The Finish page is shown as Figure 3-13. Click the Reboot button to make your wireless
configuration take effect and finish the Quick Setup.
Figure 3-13 Quick Setup – Finish
3.2.2 Access Point Mode
When you choose Access Point on Working Mode page in Figure 3-5 , take the following steps:
1. Click Next in Figure 3-5, and then Wireless page will appear as shown in Figure 3-14.
Figure 3-14 Quick Setup - Wireless
- 18 -
To Next Page
Loading...
