103
Chapter 5
Congure the Router in Hotspot Router Mode
• Connect to Root AP - The settings of the public Wi-Fi your router is going to connect
to.
• Root AP Connection - Displays the status of the root AP connection. Click
Enable/Disable to enable/disable the root AP connection.
• SSID - The SSID of the public Wi-Fi your router is going to connect to as a client.
• BSSID - The MAC address of the public Wi-Fi your router is going to connect to
as a client.
• Survey - Click this button to search the public Wi-Fi.
• Key type - Select the key type according to the public Wi-Fi’s security
configuration. It is recommended that the key type is the same as the public
Wi-Fi’s security type.
• WEP Index - Select which of the four keys will be used if the key type is WEP
(ASCII) or WEP (HEX).
• Auth Type - Select the authorization type if the key type is WEP (ASCII) or WEP
(HEX).
• Password - Enter the public Wi-Fi’s password if required.
• Local Wireless AP- The wireless settings of your router.
To Next Page
Loading...
