8
Chapter 2
Connect the Hardware
1. Switch the operation mode to AP/Rng Ext/Client and plug the router’s adapter into
an electrical outlet near your host AP.
2. Connect your device to the router wirelessly or via an Ethernet cable. The Wi-Fi
network name and password are on the router’s label.
Internet
A
B
Host AP
2. 2. 5. Client Mode
In this mode, this device can be connected to another device via an Ethernet cable and
act as an adapter to grant your wired devices access to a wireless network, especially
for a smart TV, media player, or game console.
1. Switch the operation mode to AP/Rng Ext/Client and plug the router’s adapter into
an electrical outlet within the signal range of your host AP.
2. Connect your device to the router wirelessly or via an Ethernet cable. The Wi-Fi
network name and password are on the router’s label.
Internet
OR OR
A
B
Other DeviceSmart TV Desktop
Host AP
To Next Page
Loading...
