26
Chapter 4
Configure the Router in Standard Router Mode
you attempt to access the Internet. If you want your Internet connection to
remain active at all times, enter 0 in the Max Idle Time field.
• Connect Automatically - The router will get connected to the Internet
automatically when disconnected.
• Connect Manually - You can configure the router to connect or disconnect
manually. After a specified idle period, the router will disconnect your Internet
connection. You can only manually get connected to the Internet when
Connect Manually is selected. If you want your Internet connection to remain
active at all times, enter 0 in the Max Idle Time field.
• Authentication Type - Some ISPs require authentication to access the Internet. Please
select Auto or consult your ISP.
• Auto - The router will have dynamic negotiation with the dialing server and the
authentication type doesn’t need to be specified.
• PAP - Password Authentication Protocol. Select PAS if required by your ISP.
• CHAP - Challenge Handshake Authentication Protocol. Select CHAP if required
by your ISP.
Click Advanced to set advanced options.
• Set the Dial Number and APN manually - Select this check box to fill in the dial
number and APN (Access Point Name) if your ISP is not listed or the default values are
not the latest.
• Dial Number - Enter the dial number provided by your ISP.
To Next Page
Loading...
