TP-Link WBS210 - Page 52

48
RX Signal Displays the signal strength of the wireless network.
Noise Floor Displays the noise strength of the wireless network.
CCQ Displays the wireless Client Connection Quality (CCQ). CCQ refers to the
ratio of effective transmission bandwidth and the actual total bandwidth.
It reflects the quality of the actual link. A larger value means a better
utilization of the bandwidth.
Last IP Displays the IP address of the station.
TX/RX Rate Displays the negotiated rates of the transmitted and received packets. TX
means that the device transmits data to the station, while RX means that
the device receives data from the station.
TX/RX Bit Rate Displays the data rates of the last transmitted and received packets. TX
means that the device transmits data to the station, while RX means that
the device receives data from the station.
TX/RX Packets Displays the total number of the transmitted and received packets. TX
means that the device transmits data to the station, while RX means that
the device receives data from the station.
TX/RX Packets
Rate, pps
Displays the packet rates of the transmitted and received packets. TX
means that the device transmits data to the station, while RX means that
the device receives data from the station.
Bytes
Transmitted
Displays the total amount of data which the device transmits to the
station.
Bytes Received Displays the total amount of data which the device receives from the
station.
Negotiated Rate Displays the possible negotiated rates of the packets which the device
receives from the station.
Last Signal, dBm Displays the signal strength of the last packet which the device receives
from the station at the corresponding negotiated rate.
Click the IP Address of a station to access the web management page of the station.