T+A HA 200 - Technical Specifications

Technical Specications
We reserve the right to alter technical specications.
Analog section
Frequency response + 0 / − 3 dB 0,1 Hz – 200 kHz
Signal / noise ratio 110/114 dB
THD / Intermodulation < 0,001 % / < 0,001 %
Channel separation > 108 dB
Class A operation up to 700 mA
Volume control Relay controlled in 1 dB steps, - 60 dB to 0 dB
Loudness switchable, adjustable to the headphones efciency
Sound control switchable, bass and treble -6 dB to + 8 dB
Headphone outputs 6.35 mm plug, 4.4 mm Pentaconn, XLR-4 pin
Impedances: 8, 12, 18, 25, 40, 80 Ohms
Analog inputs
High level (RCA) / balanced (XLR) 250 mV
eff
... 4,5 V
eff
/ 10 kOhms | 500 mV
eff
... 9 V
eff
/ 20 kOhms
Digital inputs
1 x AES-EBU 32...192 kHz / 16-24 Bit
S/P-DIF: 2 x Standard Coax, 2 x optical TOS-Link 32...192 kHz /
16-24 Bit,
1 x BNC 32...192 kHz / 16-24 Bit,
2 x USB DAC: Device-Mode up to 768 kSps (PCM) and DSD1024*,
supports
asynchronous data transfer. *DSD 512 and DSD 1024 with Win-
dows PC and appropriate driver installed only.
2 x HDMI IN, 1 x HDMI OUT with ARC (as an option)
Bluetooth A2DP (Audio), AVRCP 1.4 (Control) / aptX
® HD
, SBC, AAC
D/A converter section
PCM Double-Differential-Quadruple-Converter with four 32-Bit
Sigma-Delta D/A converter per channel, 705,6 / 768 kSps con-
version rate
DSD T+A-True-1Bit DSD D/A converter, up to DSD 1024 (49,2 MHz), native
bitstream
Upsampling T+A signal-processor – synchronous upsampling with four
selectable oversampling algorithms. FIR short, FIR long, Bezier/
IIR, Bezier, NOS (non-oversampling)
Analog lter Phase-linear Bessel lter 3rd order, switchable with 60 or 120
kHz cut of frequency
Mains 200 – 240 V, 50 – 60 Hz, 100 Watts
Standby < 0,5 Watts
Dimensions (H × W× D) 10 × 32 × 34 cm, 4 x 12.6 x 13.4 inch
Accessories Remote control FM8, power cord, USB-cable for charging RC,
USB cable 2.0 for DAC, RCA cable, Bluetooth antenna
Weight 6,5 kg, 14.4 lbs
54