T+A PA 1100 E User Manual

Controls and functions
1
On / Off switch
Pressing this button briey switches the device on and off. When the unit is switched
on the indicator LED above the button glows.
Please note the hints in the chapter „Automatic power down function“ on page 50.
2
Source selection
By pressing a source selection button, one of the connected signal sources is selec-
ted as the listening source. The LEDs above the source selection buttons indicate
which source is currently being listened to by means of different colours. Press the
corresponding button repeatedly until the desired input is selected.
Button Source Indicator
IN1
USB
IN 1 red
USB blue
Flashes when no device is connected
IN2
S/P-DIF
IN 2 red
S/P-DIF 1 blue
Flashes when no signal is detected
S/P-DIF 2 green
IN3
OPT
IN 3 red
OPT 1 blue
Flashes when no signal is detected
OPT 2 green
IN4/P
HDMI
IN 4 /P red
HDMI 1 blue
Only with optional built-in HDMI module
HDMI 2 green
HDMI ARC violett
IN5/R
BT
IN 5/R red
BT blue
Flashes when no device is connected
34

T+A PA 1100 E Specifications

General

Brand	T+A
Model	PA 1100 E
Category	Amplifier
Language	English