T+A PA 1100 E User Manual

Specications power-amplier
Nominal output per channel 4 Ohms / 8
Ohms
2 x 250 Watts / 2 x 140 Watts
Peak output per channel 4 Ohms / 8
Ohms
2 x 400 Watts / 2 x 220 Watts
Frequency responce (+0 -3dB) 1 Hz - 60 kHz
THD / Intermodulation < 0,004 % / < 0,004 %
Specications preamplier (PRE, REC)
Frequency responce / THD 1 Hz - 300 kHz / 0,0025 %
S/N ratio / Channel separation 108 dBA / > 82 dB
Analogue inputs 5 x RCA
1 x balanced
(XLR)
250 mV
eff
... 3 V
eff
/ 20 kOhm
500 mV
eff
... 6 V
eff
/ 5 kOhm
Outputs 2 x RCA PRE OUT, REC OUT 2,5 V
eff
/ 50 Ohm; Headphones 6,3 mm
plug > 32 Ohms
Digital section (DAC, Inputs)
D/A converter PCM: 32-bit Sigma Delta, 384 kSps
DSD: up to DSD 256 (11,2 MHz)
switchable oversampling algorithms:
Standard-FIR and T+A Bezier
Digital inputs 2 x SP/DIF coax. PCM 32 ... 192 kSps
2 x TOSLINK opt. PCM 32 ... 192 kSps
1 x USB-B PCM 32 ... 384 kSps. DSD 64 ... DSD 256 (MAC-OS up to DSD
128)
HDMI modul
(optional accessor)
2 x HDMI,
1 x HDMI (ARC)
Stereo: PCM 32 ... 384 kSps, DSD 64
Stereo: PCM 32 ... 192 kSps
Bluetooth Supported
audio formats
APT-X, MP3, AAC, SBC
Remote control
protocol
AVRCP
Optional accessories plug-in phono module MM, 1 - 5 mV, 16 capacitance values
plug-in phono module MC, 60 - 1000 µV, 16 impedance values
plug-in HDMI modul
Remote control system FM 11 with E 2000
Mains supply / Standby 220-240 V or 110-120 V, 50-60 Hz, 600 W / < 0,5 Watts
Dimensions (W x H x D) / Weight 44 x 11,5 x 38 cm (17,3 x 4,5 x 15 inch) / 14 kg (31 lbs)
Technical Specications
We reserve the right to alter technical specications.
51

T+A PA 1100 E Specifications

General

Brand	T+A
Model	PA 1100 E
Category	Amplifier
Language	English