11.7 GLP Data Format
GLP information is returned as 8 lines terminated by a carriage return.
When using the “?G” command (section 11.5), the computer must
respond with a character after receiving each line. For example…
WP81 V6.0 S1234 @ 31/12/03 12:00
Conductivity Zero= 0.00uS @ 30/03/11 11:05
Conductivity k= 1.00 @ 2.76mS @ 30/03/11 11:10
pH Asy= 0.00pH @ 30/03/11 11:25
pH Slope= 100.0% @ 30/03/11 11:30
Temperature Offset= 1.0oC @ 20/03/11 11:35
ENDS
To Next Page
Loading...
