EasyManuals Logo

TPS WP-81 User Manual

TPS WP-81
51 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #35 background imageLoading...
Page #35 background image
Page 35
14. Recharging the Battery
The symbol flashes when the battery drops below 5.60 volts. The
battery should be recharged at this point. If the battery is not recharged,
the WP-81 will switch itself off when the battery drops below 5.00 volts.
To recharge the battery…
1. Plug the battery charger, solar panel, or car cigarette lighter adaptor
into the Charger/RS232 socket. DO NOT plug into the Conductivity
/ TDS socket, as this will damage the WP-81.
2. Charge for approximately 8 hours for full capacity. The WP-81 has
special circuitry to prevent overcharging, so the charger can be used
continuously.
To ensure optimum battery life and capacity, the WP-81 should only be
charged once the symbol starts to flash.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the TPS WP-81 and is the answer not in the manual?

TPS WP-81 Specifications

General IconGeneral
BrandTPS
ModelWP-81
CategoryMeasuring Instruments
LanguageEnglish

Related product manuals