| 28
• Though robust in design, this instrument is precision-machined.
Never drop it or knock it over.
• Always clean the instrument after use.
• Clean the instrument using a soft dry cloth. Never clean the instrument
by any mechanical means such as a wire brush or abrasive paper. This may
cause, just like the use of aggressive cleaning agents, permanent damage.
• Do not use compressed air to clean the instrument.
• Never bend or exert extreme forces on the tool carrier
• Generally the TQC Scrub Abrasion and Washability Tester does not require
any maintenance.
Make sure that no paint or other liquids are spilled on the
electronics or left in the tubing.
11.1 Disposal of Materials
Disposal of materials used in the operation of the instrument or for auxiliary
functions and exchanged items should be dealt with safety and in a manner
that will not harm the environment. Follow the local regulations.
11.2 Customer Service
Customer service is provided on request by
TQC – Molenbaan 19 , 2908LL Capelle aan den IJssel - The Netherlands,
T +31(0)10 7900100, F +31 (0)10 7900129 or by local representatives.
11 CARE AND MAINTENANCE
To Next Page
Loading...