Basic safety instructions
© TR-Electronic GmbH 1997, All Rights Reserved Printed in the Federal Republic of Germany
Page 6 of 45 TR - ECE - BA - GB - 0009 - 08 03/04/2010
1 Basic safety instructions
1.1 Definition of symbols and instructions
WARNING !
means that death, serious injury or major damage to property
could occur if the stated precautions are not met.
CAUTION !
means that minor injuries or damage to property can occur if
the stated precautions are not met.
indicates important information's or features and application tips
for the product used.
means that appropriate ESD-protective measures are to be
considered according to DIN EN 100 015-1.
(Cause of a potential equalization between body and device-mass
as well as the housing-mass about a high-impedance resistance
(approx. 1 MΩ) e.g. with a commercial ESD wrist strap).
1.2 Obligation of the operator before start-up
As an electronic device the measuring system is subject to the regulations of the EMC
Directive.
It is therefore only permitted to start up the measuring system if it has been
established that the system/machine into which the measuring system is to be fitted
satisfies the provisions of the EC EMC Directive, the harmonized standards,
European standards or the corresponding national standards.
To Next Page