EasyManuals Logo

Trace Engineering RC7 Manual

Trace Engineering RC7
20 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Introducing the RC7 & RC7GS Remote Control
The RC7 and RC7GS (Generator Start) enable you to remotely control any RV and Legend
Series II inverter/charger rated from 2000 to 3000 watts and equipped with an RJ11 remote
control jack. The inverter must have software version 1.10 or better (upgrades are
available).
These remote control devices feature inverter On/Off control, meters, error messages, and
informative displays so that you can optimize the performance of your inverter/charger.
Throughout this booklet, all features described are available on both the RC7 and
the RC7GS, unless specified otherwise. Generator control features apply to the RC7GS
only.
Note:
System Status:
Bulk Charging
RC7 & RC7GS
Remote Control
1
Copyright Trace Engineering Co. Inc. Tel (360) 435-8826 Part Number 822-4
5916 195 Street, NE Fax (360)435-2229 Effective: November 1, 1997
Arlington, WA 98223 USA www.traceengineering.com Page
th

Other manuals for Trace Engineering RC7

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Trace Engineering RC7 and is the answer not in the manual?

Trace Engineering RC7 Specifications

General IconGeneral
BrandTrace Engineering
ModelRC7
CategoryRemote Control
LanguageEnglish