Trace2O METALYSER FIELD PRO HM3000 User Manual

3.5 Instrument Menu System
If used as a standalone instrument, the Metalyser
®
is controlled via a
system of on-screen menus. The structure of these menus is illustrated
below to assist you in navigating them.
Main Menu
Test
Methods
→
Condition Electrode
Used to condition the working electrode with a
Conditioning solution. When used as part of a
test it is used to prime the electrode to
increase sensitivity
→
Analyse Sample
Used with Calibrate function. Calibration must
be undertaken before analyse sample can be
used
→
Standard Addition
Used to analyse samples and calculate the
unknown concentration by the addition of a
known standard
→
Calibrate
Used with analyse sample. Calibration must be
performed before analyse sample is used
→
Blank subtraction
Used to set or replace a baseline if
contaminants are suspected in the buffer.
Data Log
→
View Log Data Log viewing options
→
Last Result Displays latest result and graph
System
→
Backlight Backlight control options
→
Set date/time Used to set the instrument date and time
→
Language Used to select the display language
→
Charge Battery charging options
→
Auto switch off Auto off select
→
Program P/STAT
Program internal hardware (Not used in normal
operation)
Metalyser® Field Pro HM3000 Instruction Manual v 5.0
www.trace2o.com
10

Trace2O METALYSER FIELD PRO HM3000 Specifications

General

Brand	Trace2O
Model	METALYSER FIELD PRO HM3000
Category	Measuring Instruments
Language	English