Trace2O METALYSER FIELD PRO HM3000 User Manual

4.5 Auto switch off (Instrument method only)
The Metalyser
®
instrument can be set to automatically switch off after ten
minutes of inactivity. This is recommended to extend battery life. To adjust the
Auto Switch Off:
• From the main menu, select System
• From the system menu, select Auto Switch Off
• Highlight the required setting and press <OK>
• Press <cancel> to return to main menu
Metalyser® Field Pro HM3000 Instruction Manual v 5.0
www.trace2o.com
22

Trace2O METALYSER FIELD PRO HM3000 Specifications

General

Brand	Trace2O
Model	METALYSER FIELD PRO HM3000
Category	Measuring Instruments
Language	English