B
138
Repair and Service Manual
GENERAL SPECIFICATIONS
Read all of SAFETY and this section before attempting any procedure. Pay particular attention to Notices, Cautions, Warnings and Dangers.
699322
Front and Rear Tires K500 20 x 10 - 10 (6 ply rated)
Frame
Welded steel with DuraShield
TM
powder coat
Body and Finish Injection Molded TPO
Standard Color Black
Noise Sound pressure; continued A-weighted equal to or less than 74 db(A)
Vibration, WBV Highest RMS value of weighted acceleration is less than 2.5 m/s².
Vibration, HAV Highest RMS value of weighted acceleration is less than 2.5 m/s².
The uncertainty of measurement is 1.07 m/s².
Measurement methods were applied per the ISO 2631 and ISO 5349 standards
under conditions of typical vehicle surfaces.
Some items shown may be optional equipment
To Next Page
Loading...
