B
SUSPENSION AND SFRONT SUSPENSION AND STEERING
Read all of SAFETY and this section before attempting any procedure. Pay particular attention to Notices, Cautions, Warnings and Dangers.
63
Repair and Service Manual
699322
14. Press the steering shaft and bearing assembly into
the column base. Secure with the large retaining ring
making sure it is fully seated in the groove of the col-
umn.
15. Place the steering column on the vehicle and tighten
the column mounting bolts (5) to 29 ft. lbs. (39 Nm)
torque.
16. Tighten the bolt (1) securing the intermediate shaft to
the steering shaft to 156 - 216 in. lbs. (180 - 250 kg
cm) torque.
17. Install the front wheel(s) per the WHEELS AND
TIRES section.
18. Lower vehicle per the SAFETY section
19. Install the steering wheel. See the Steering Wheel
Replacement on page 61.
To Next Page
Loading...
