27
HOPPER CLEAN-OUT
Your Traeger® Grill has a hopper clean-out system that allows you to remove pellets from the pellet hopper or quickly change from one pellet
flavor to another without making a mess.
1
3
2
4
PLUG APPEARANCE MAY VARY BY REGION.
Turn the switch to OFF (O) and disconnect the power cord.
If the grill is still hot, allow it to cool completely.
Unscrew the clean-out door fastener and open it. Pellets will empty
into the container you've placed below. You might need a spatula or
spoon to push the remaining pellets out of the hopper.
Once the hopper is empty, close the clean-out door, replace the
fastener, and refill the hopper with a dierent flavor of TRAEGER®
ALL-NATURAL HARDWOOD PELLETS.
Place a container large enough to hold the unused pellets under the
pellet clean-out door.
TIP: A clean 5-gallon (19-liter) bucket works great!
WARNING! DO NOT EMPTY OUT THE HOPPER UNTIL
GRILL HAS COMPLETELY COOLED AND THE POWER IS
OFF; OTHERWISE, PELLETS MAY BE VERY HOT.
T09627_Redland_OM_EN.indd 27T09627_Redland_OM_EN.indd 27 9/16/22 10:59 AM9/16/22 10:59 AM
To Next Page