To Next PageTo Next PageWhat should I do if I get an IGNITION WARNING notification from the Traeger REDLAND app?
If you receive an IGNITION WARNING notification from the Traeger Grill app, check the pellets and restart the grill.
What to do if my Traeger REDLAND Grill shows a LOW TEMP ERROR?
If your Traeger Grill displays a LOW TEMP ERROR, it could be due to an improper startup, lack of maintenance, or running out of pellets. First, unplug the grill and remove all pellets and ash from the firepot, including any pellets inside the grill. When restarting, turn the controller off, then back on. If the problem persists, further assistance may be needed.
Why does my Traeger REDLAND Grill display a HIGH TEMP ERROR?
A HIGH TEMP ERROR on your Traeger Grill often results from an improper startup after a low temp error. To resolve this, let the grill cool completely, then turn it off. Check the hopper, auger, and firepot, removing any remaining pellets from the firepot and grill body. Then, restart your grill. If the issue continues, it's important to discontinue using the grill.
What to do if I see an AUGER OVERCURRENT error on my Traeger Grill?
An AUGER OVERCURRENT error on your Traeger Grill means that the auger motor might be damaged or jammed. Try using the Clear Auger feature in the control menu and then restart the grill. If the problem persists, the auger motor may need replacing.
What to do if my Traeger REDLAND Grill has a LOW TEMP WARNING?
If your Traeger grill is showing a LOW TEMP WARNING, check the pellets and restart the grill.
How do I fix a BAD PROBE error on my Traeger REDLAND?
The probe will need to be replaced.
Emphasizes reading the entire manual before operating the grill for safety.
Details risks and precautions regarding carbon monoxide produced by burning wood.
Outlines minimum clearances and precautions to prevent grill fires.
Provides critical steps to take in case of a grease fire and how to extinguish it.
Warns against auger dangers and burns from hot grill parts.
Addresses potential smoke issues and the "grill burp" phenomenon.
Covers electrical shock hazards and proper use of outdoor extension cords.
Discusses grill modifications, supervision, and using only approved wood pellets.
Warns against using heating fuel pellets due to contaminants.
Steps to take if a fire in the firepot goes out and how to safely restart.
Advises on cleaning grease when warm and using heat-protective gloves.
States compliance with FCC rules for digital devices and potential interference.
Discusses different wood pellet flavors and their suitability for various foods.
Suggests food pairings for different wood flavors like beef and pizza.
Explains the process of making Traeger pellets from sawdust using heat and pressure.
Identifies and describes the various components and parts of the Traeger grill.
Details the pellet hopper's capacity and its connection to WiFIRE® Technology.
Explains the grill's design for convection cooking and even heat distribution.
Describes the WiFIRE® Technology for remote control and app integration.
Highlights the ample grilling space and adjustable grate system for various cooking needs.
Explains how indirect heat and grease management prevent flare-ups.
Details the functions of the digital controller, including Standby, Status Display, and Selection Dial.
Explains the specific functions of buttons like Timer, Super Smoke, Keep Warm, Menu, and Ignite.
Provides instructions for downloading the Traeger app and connecting the grill to Wi-Fi.
Offers advice for optimizing Wi-Fi signal strength for better connectivity.
Details the initial step of priming the auger with pellets before seasoning.
Explains how to run the grill at high temperatures to season it properly.
Lists essential checks and maintenance steps before each grilling session.
Reiterates safety warnings for clearance, outdoor use, and pellet types.
Describes how to set a single temperature for simple recipes.
Details closing the grill door during cooking and the shut-down cycle.
Provides critical instructions for handling a fire emergency, emphasizing safety.
Explains how to use pre-programmed cook cycles like Beginner's Brisket.
Guides on confirming and starting a custom cook cycle, including probe usage.
Details the process of creating and saving personalized cook cycles with multiple steps.
Explains how to add steps, super smoke, save, and manage custom cook cycles.
Guides on using the meat probe to achieve specific internal food temperatures.
Explains probe insertion, alarm setting, and critical safety warnings for hot probes.
Describes how to navigate to and use the grill's settings menu.
Covers adjusting speaker, display contrast, and temperature units.
Details probe calibration methods and clearing notifications.
Explains accessing customer service and grill information.
Provides step-by-step instructions for safely removing pellets from the hopper.
Explains how to use the Traeger app for remote grill control and recipe management.
Describes the timer and Keep Warm functions for cooking management.
Details how to activate the Super Smoke feature for enhanced smoky flavor.
Describes the pellet sensor's function for monitoring pellet levels remotely.
Explains how to adjust the lower grate for sear or smoke cooking positions.
Details rack stops for stability and recommends using a grill cover.
Provides instructions for cleaning the TGMS components to prevent grease fires.
Explains how to remove creosote buildup from the exhaust system.
Advises on protecting the grill from weather, especially water in the hopper.
Details how to clean ash from the firepot and safe disposal methods.
Recommends cleaning grates while warm and exterior surfaces with proper cleaners.
Explains testing after cleaning and power cord replacement advice.
Directs users to scan a QR code for FAQs.
Lists common error messages and their corresponding solutions.
Covers more error messages like Auger Overcurrent, Low Ambient Temp, and Probe issues.
Explains how to clear error messages and notifications from the menu.
Addresses common issues related to Wi-Fi connectivity and app usage.
Emphasizes updates and gradual temperature changes during grilling.
Covers changing temperature units and the importance of keeping the grill door closed.
Discusses overloading, airflow, and cooking different food types safely.
Stresses regular cleaning, especially of the TGMS, to prevent fires.
Provides contact information and website for customer support and assistance.
Explains how to use QR codes to access Traeger's support homepage and information.
Outlines the warranty periods and coverage for various grill components.
Details warranty exclusions, limitations, and conditions that void the warranty.
Explains the process for submitting a warranty claim and required documentation.
General