Traeger REDLAND - Traeger Pellet Sensor Functionality; Versatile Lower Grate Adjustment; Rack Stops and Grill Cover

29
VERSATILE LOWER GRATE
You can change the placement of the bottom grill grate for two dierent cooking
options: Sear Position and Smoke Position.
In Sear Position, the grill grate should be placed at the lowest point in the grill
body cavity, resting on the lowest back brackets and the lip at the front. This
ensures that the radiant heat from the grease drip tray is maximized and your
food has sear marks.
For Smoke Position, place the grill grate on the higher front brackets, sliding
it into the channel at the back. This will allow the smoke to fully circulate for
convection cooking.
NOTE: The upper grate has two positions, center and back. There are storage
hooks on the rear of the skirt for the upper grate while not in use.
TRAEGER PELLET SENSOR (included only with Redland XL;
available for Redland as an accessory)
The Traeger Pellet Sensor monitors the supply of pellets. Once selected from the
menu, it will display the current level of pellets as a percentage in increments of 5%.
If the Traeger Pellet Sensor is properly connected it will display “PELLET SENSOR
Pellet Level: XX%.” If the Traeger Pellet Sensor is not properly connected it will
display “PELLET SENSOR Sensor Disconnected Pellet Level: 0%.”
The Traeger Pellet Sensor allows you to check the status of your pellet level
remotely using the Traeger app. This system will send you push notifications and
alarms through the Traeger app on your smart device when your pellets are getting
low, protecting your cook from running out of fuel.
TRAEGER WiFIRE
>Cook Cycle
>Probe
>Auger
>Pellet Sensor
>Wi-Fi Information
RACK STOPS
Located at the front of the slider brackets for the bottom grate, rack stops provide
additional stability when accessing food. Simply slide the grate out until the
crossbar catches in the rack stop, and you’ll be able to flip burgers or baste ribs
easily without the rack tipping.
GRILL COVER
Protect your Traeger® Grill with a Traeger® brand custom-fit cover, designed to
protect your grill from the elements. This durable grill cover is available at your local
dealer or for purchase at traeger.com.
WARNING! FIRE HAZARD: DO NOT INSTALL YOUR GRILL COVER
UNTIL THE GRILL HAS COMPLETELY COOLED.
T09627_Redland_OM_EN.indd 29T09627_Redland_OM_EN.indd 29 9/16/22 10:59 AM9/16/22 10:59 AM