5
TRAEGERGRILLS.COM
SAVE THESE INSTRUCTIONS
12"
(30.5 cm)
18"
(45.7 cm)
18"
(45.7 cm)
• Remove all unburned pellets and ash from inside
and around the repot. (See instructions for proper
handling and disposal of ash on page 23.)
• Before replacing the heat bafe, drip tray, and the
grill grates, plug the power cord into an appropriate
grounded/earthed electrical outlet and turn the switch
ON (I). Pellets should fall into the repot and the hot
rod should begin to heat (it will start to turn red).
w CAUTION
Do not touch the hot rod.
• When ames start to come out of the repot, turn the
switch OFF (O). Let the grill cool down. Now you’re
ready to place the heat bafe, grease drip tray, grill
grates, and food back into the grill.
To Next Page
Loading...
Need help?
General
