CONCRETE MOISTURE ENCOUNTER X5 USER GUIDE
10
● To conserve battery life, the instrument
automatically powers OFF after 5 minutes of
inactivity or when the key is pressed. If a key is
pressed the 'power off'-time will be extended for
an additional ten minutes.
● Front lit display allows the display to be easily read
in poor light conditions. This is enabled by pressing
the key. The backlight stays on for a period of
time set.
● HOLD freezes reading to facilitate ease of
recording readings. When the Concrete Moisture
Encounter X5 is in HOLD mode, ‘II’ is visible on
the display. If HOLD was selected prior to the
Concrete Moisture Encounter X5 automatically
powering off, the frozen display reading is digitally
memorized and restored next time ON is selected.
● When the battery requires replacement a LOW
BATTERY icon is shown on the display.
To Next Page
Loading...
Need help?
General
