20
SCXF-SVX01T-EN
Unit Protective Covers
Remove shipping protection coverings from human
interface panel (HI) at control panel, filter box (or air inlet
opening), discharge air opening, and optional variable
frequency drive (VFD).
Supply Fan Isolators
Remove the shipping channels and four fan mounting bolts
from beneath the fan. Open both fan compartment doors to
access the channels.
Notes:
• There are six fan mounting points for 40-110
ton units.
• The 20 to 38 ton units use neoprene isolators,
and 40 to 110 ton units use spring isolators.
Figure 4. Fan Assembly Shipping Spacer Locations
Pre-Installation
To Next Page
Loading...