Trane Technologies IntelliPak Signature SCWF - Steam and Hot Water Coil Piping

SCXF-SVX01T-EN
25
Steam and Hot Water Coils
Steam Coils
Figure 10. Steam Coil
Main Control Panel
Vacuum Trap Connection
Condensate Return
Vacuum Trap Connection
Steam Inlet Connection
Condensate Return
Air Inlet
L
K
F
N
M
H
J
A
C
B
Table 9. Piping locations for steam coils (in.)(lbs)
Unit Size A B C D E F G H J K L M N
Weight
20-38 Ton 60-3/8 82-7/8 18 — — 22-3/8 — — 18-1/2 3-7/8 5 4-3/8 1-1/4 460
42-80 Ton 72-7/8 105-1/4 18 — — 13-1/4 — — 22-1/8 6-3/8 5-375 4-3/8 1-1/4 600
Note: Weight includes complete heating coil box.
Hot Water Coils
Figure 11. Hot Water Coil
Notes:
1. All coils are factory mounted, piped, and wired.
2. All piping connections are 1-1/2” (38.1mm) internal NPT fittings.
Main Control Panel
Air Inlet
Hot Water Outlet Connection
Hot Water Inlet Connection
H
F
G
A
B
E
D
C
Table 10. Hot water coil piping locations and weight (in.)(lbs)
Unit Size A B C D E F G H
Weight
20-38 Ton 60 3/8 82 7/8 18 20 5/8 8 1/8 22 3/8 3 5/8 8 1/4 460
42-80 Ton 72 7/8 105 1/4 18 24 1/2 10 3/4 13 1/4 3 5/8 8 1/4 600
Note: Weight includes complete heating coil box.
Dimensional Data