BAS-SVX10F-EN 35
Maintenance and Troubleshooting
Cleaning the Sensor
NOTICE:
Equipment damage!
Spraying glass cleaner or any other solution directly on the sensor may damage it.
You can clean the sensor by applying glass cleaner to a soft, non-abrasive cloth, and gently wiping
the face, including the buttons and LCD display. Use of a pre-moistened towelette designed for lens
or screen cleaning is also acceptable.
Avoid inadvertent pressing buttons on sensors that have
them or the keypad on the display sensor,
as this may result in an unwanted timed override or settings change.
Replacing the Thumb Wheel
If you need to replace a setpoint thumb wheel, see “Changing the Setpoint Thumb Wheel
(optional),” p. 24.
To Next Page
Loading...