To Next PageTo Next Page
Need help?Do you have a question about the Trane 4YCC4024E1060 and is the answer not in the manual?
General| Model | 4YCC4024E1060 |
|---|---|
| Type | Air Handler |
| Cooling Capacity | 2 tons |
| Refrigerant | R-410A |
| Seasonal Energy Efficiency Ratio (SEER) | 16 |
| HSPF | 9.0 |
| Voltage | 208/230V |
| Nominal Airflow | 800 CFM |
| Phase | 1 |
| Motor Type | ECM |
| Filter Type | Standard |
| Depth | 21 inches |
| Heating Capacity | 24000 BTU |
General safety warnings, cautions, and requirements for safe operation.
Reading the manual and checking for damage after unloading.
Detailed technical specifications for different unit models.
Recommended clearances for unit installation and service.
Guidelines for selecting appropriate unit location and installation.
Attaching flue hood and procedures for ground level mounting.
Installing the unit on a roof curb.
Procedure to change airflow direction from horizontal to down.
Safe methods for lifting and rigging the unit.
Installing the unit on a roof frame.
Installing the unit on sleeper rails.
Guidelines for attaching supply and return air ducts.
Procedures for installing the condensate drain line.
Gas pipe connection, pressure testing, and manifold checks.
Adjusting burner orifices for high altitudes.
Installing the required air filter for the unit.
Installing wiring, grounding, power, and control connections.
Checklist before start and procedures for cooling/heating startup.
Detailed system operation cycles for heating and cooling.
Safety devices and final installation checklist.
Interpreting diagnostic LEDs and cooling performance pressure curves.
Recommendations for annual service maintenance.
Procedure for cleaning the flue hood and blower.
Diagram and explanation of the refrigerant circuit.
Guide to diagnose and resolve system faults.
Instructions for contacting dealer and basic service checks.
