Trane 4YCC4060E1115 - User Manual

SSAAFFEETTYY WWAARRNNIINNGG
Only qualified personnel should install and service the equipment. The installation, starting up, and servicing of heating, ventilating, and air-conditioning
equipment can be hazardous and requires specific knowledge and training. Improperly installed, adjusted or altered equipment by an unqualified person
could result in death or serious injury. When working on the equipment, observe all precautions in the literature and on the tags, stickers, and labels that
are attached to the equipment.
February 2023
1188--EEBB4400DD11--11CC--EENN
Single Packaged Gas/Electric
13.4 SEER2 Convertible, 2 - 5 Ton
4YCC4024E1060
4YCC4030E1070
4YCC4036E1070
4YCC4036E1090
4YCC4042E1060
4YCC4042E1090
4YCC4048E1070
4YCC4048E1090
4YCC4060E1090
4YCC4060E1115
NNoottee:: “Graphics in this document are for representation
only. Actual model may differ in appearance.”
Installation and Operations Manual

Trane 4YCC4060E1115 Specifications

General

Brand	Trane
Model	4YCC4060E1115
Category	Air Handlers
Language	English

Summary

Safety Warnings

Hazardous Conditions and Precautions

Crucial safety information regarding hazardous materials, voltage, grounding, and general hazards.

Product Specifications

Refrigerant Charging

Charging Procedures and Tables

Guidelines and tables for correctly charging the refrigerant system.

Unit Clearances

Unit Installation

Mounting and Airflow Configuration

Steps for installing the unit, including mounting and airflow configuration.

Lifting and Rigging

Piping and Ductwork Connections

Horizontal Ductwork, Condensate, Gas Piping

Guidance on connecting horizontal ductwork, condensate drain, and gas piping systems.

Gas Pressure and Input Checks

Gas Pressure Setup and Input

Procedures for setting gas pressure and verifying input rates for safe operation.

Electrical Wiring

Wiring, Disconnects, and Power

Detailed guide to electrical connections, power supply, and safety disconnects.

Unit Startup

Pre-Start Checklist and Mode Startup

Startup checklist, and procedures for initiating cooling or heating modes.

Sequence of Operation

System Operation Cycles

Description of the unit's functional sequences in heating and cooling modes.

Maintenance

Service Maintenance and Cleaning

Recommended periodic maintenance for unit longevity and efficiency.

Troubleshooting Chart