EasyManua.ls Logo

Trane 4YCC4036E1090 User Manual

Trane 4YCC4036E1090
44 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
SSAAFFEETTYY WWAARRNNIINNGG
Only qualified personnel should install and service the equipment. The installation, starting up, and servicing of heating, ventilating, and air-conditioning
equipment can be hazardous and requires specific knowledge and training. Improperly installed, adjusted or altered equipment by an unqualified person
could result in death or serious injury. When working on the equipment, observe all precautions in the literature and on the tags, stickers, and labels that
are attached to the equipment.
February 2023
1188--EEBB4400DD11--11CC--EENN
Single Packaged Gas/Electric
13.4 SEER2 Convertible, 2 - 5 Ton
4YCC4024E1060
4YCC4030E1070
4YCC4036E1070
4YCC4036E1090
4YCC4042E1060
4YCC4042E1090
4YCC4048E1070
4YCC4048E1090
4YCC4060E1090
4YCC4060E1115
NNoottee:: “Graphics in this document are for representation
only. Actual model may differ in appearance.”
Installation and Operations Manual
Question and Answer IconNeed help?

Do you have a question about the Trane 4YCC4036E1090 and is the answer not in the manual?

Trane 4YCC4036E1090 Specifications

General IconGeneral
Model4YCC4036E1090
RefrigerantR-410A
Energy Efficiency Ratio (EER)Up to 12.5
Voltage208/230V
Phase1
Maximum External Static Pressure0.8 in. wc
TypeAir Handler
Cooling Capacity36000 BTU/H
Filter Type1" Standard

Summary

Safety Information

General Safety Warnings

Key warnings and cautions for safe installation and operation.

Electrical and Grounding Safety

Hazards related to high voltage, grounding, and electrical shock.

Unit Installation

Gas Piping Installation

Gas Supply and Pressure Setup

Connecting gas lines, pressure testing, and regulator use.

Electrical Wiring

Power Wiring and Connections

Instructions for connecting power supply lines and wiring to the unit.

Unit Startup

Pre-Start Checklist and Mode Selection

Final installation checks before operation in cooling or heating modes.

Sequence of Operation Details

Explanation of heating and cooling cycle operations and thermostat control.

Maintenance

Troubleshooting Chart

Refrigerant Circuit Fault Diagnosis

Identifying causes for high/low liquid and suction pressures and floodback.

Electrical System Fault Diagnosis

Identifying causes for compressor, fan, and control circuit issues.

Related product manuals