To Next PageTo Next Page
Need help?Do you have a question about the Trane 4YCC4024A1060A and is the answer not in the manual?
General| Model | 4YCC4024A1060A |
|---|---|
| Type | Air Handler |
| Cooling Capacity | 2 tons |
| Refrigerant | R-410A |
| Voltage | 208/230V |
| Phase | 1 |
| Motor Type | PSC |
| Nominal Airflow | 800 CFM |
| Depth | 21 inches |
Covers critical warnings regarding hazardous gases, voltage, refrigerants, and general safety practices.
Overview of the installer's guide and its organization.
Procedure for checking the unit for damage, correct specifications, and refrigerant charge after unloading.
Details required service and combustible material clearances, illustrated with diagrams for specific unit models.
Details required service and combustible material clearances, illustrated with diagrams for specific unit models.
Guidelines for selecting location and ensuring proper airflow, including horizontal and downflow unit placement.
Covers flue hood, ground level, and rooftop installation procedures for the unit.
Guidance on attaching downflow and horizontal ductwork to the unit and frame, including canvas connectors.
Procedures and safety precautions for connecting the gas supply line to the unit, including pressure checks.
Instructions for power supply wiring, grounding, and disconnect switch installation for the unit.
Guidelines for low voltage control wiring, routing thermostat cable, and making connections.
Schematic showing field wiring connections for thermostat, economizer accessories, and unit control box.
Checklist before starting and procedure for initiating cooling mode operation, including pressure checks.
Procedure for starting heating mode, burner operation, and a comprehensive final installation checklist.
Description of system operation in cooling, heating cycles, and safety sequences.
Recommendations for annual service checks and inspections during cooling and heating seasons.
