Trane 4YCC4036A1070A User Manual

SSAAFFEETTYY WWAARRNNIINNGG
Only qualified personnel should install and service the equipment. The installation, starting up, and servicing of heating, ventilating, and air-conditioning
equipment can be hazardous and requires specific knowledge and training. Improperly installed, adjusted or altered equipment by an unqualified person
could result in death or serious injury. When working on the equipment, observe all precautions in the literature and on the tags, stickers, and labels that
are attached to the equipment.
June 2020
1188--EEBB3311DD11--11FF--EENN
Single Packaged Gas/Electric
14 SEER Convertible, 2 — 5 Ton
4YCC4024A1060A
4YCC4030A1070A
4YCC4036A1070A
4YCC4036A1090A
4YCC4042A1060A
4YCC4042A1090A
4YCC4048A1070A
4YCC4048A1090A
4YCC4060A1090A
4YCC4060A1115A
Installer’s Guide

Trane 4YCC4036A1070A Specifications

General

Model	4YCC4036A1070A
Type	Air Handler
Refrigerant	R-410A
Energy Efficiency Ratio (EER)	12.0
Voltage	208/230V
Phase	1
Cooling Capacity	36000 BTU/H
Airflow	1200 CFM
Dimensions	Varies with installation
Weight	150 lbs
Cabinet Insulation	Fiberglass
Filter Type	Standard 1" Filter
Length	22 inches
Motor Type	PSC or ECM (varies by model)
Maximum External Static Pressure	0.8 in. w.c.

Summary

Introduction

Inspect Shipment

Inspect the unit upon delivery for any damage or incorrect parts.

Step 2 Determine Unit Clearances

Step 4 Unit Installation

Mounting and Placement Procedures

System Connections

Connect ductwork, condensate drain, and gas piping.

Specialized Installation Conditions

Electrical Wiring

Wiring and Connections

Guidelines for connecting power and control wiring.

Safety and Protection

Field Wiring Diagram

Step 5 Unit Startup

Cooling Mode Startup and Operation

Steps for starting, checking, and shutting down in cooling mode.

Heating Mode Startup

Procedures for starting the unit in heating mode.