54
BAS-SVX40K-EN
4. Configure the sensor options in the order shown in the table.
• Press
or to scroll to the next selection (as illustrated).
• Press
or to move to the next menu (as illustrated).
Table 10. WCS—SB/SD configuration options
Setting Configuration options
Temperature
• Choose Fahrenheit or Celsius
• Choose the degree resolution
(whole degrees, half degrees, or
tenths of degrees).
Setpoint
dual setpoint
no
setpoint
single
setpoint
Deadband (available for dual
setpoint system only)
Note: Deadband refers to the
minimum difference between
the heating and cooling
setpoints.
.
heat/cool setpoint offset
(1.8˚F – 10.8˚F, 1˚C – 6˚C)
System
a) Single setpoint
System (continued)
b) Dual setpoint
emergency heat/
heat/cool/off
heat/cool/
auto/off
emergency heat/
heat/cool/auto/off
System (continued)
c) No setpoint
WCS-SB/SD Configuration
To Next Page
Loading...
